Info & pricing
570-538-7200
tpsinfo@tps.spx.com
|
|
1200º Box Furnace, Heavy
Duty With Refractory Plate Heating Element, Temperature Range
100ºC to 1200ºC
| Model |
Independent
Controller |
Electrical
Volts,
Hz, 1Ø |
Watts |
Interior
Dimensions
W X D X H in" (mm) |
Exterior
Dimensions
W X D X H in" (mm) |
Ship
Weight
lbs (kg) |
| BF51442C |
CC58114C |
208/240V,
50/60 Hz |
4800 |
7.5"(190)x14"(356)x5.25"(133) |
20"(508)x20"(508)x24.5"(622) |
145
(66) |
With
Moldatherm® Heating Element (Four Sides), Temperature Range
100ºC to 1200ºC
|
| BF51542C |
CC58114C |
208/240V,
50/60 Hz |
6200 |
10.5"(267)x14.5"(368)x9.5"(241) |
28"(711)x31"(787)x28.5"(724) |
335
(152) |
Controllers
1200°C Digital, Single Setpoint Controller
Control console is fully wired and includes advanced microprocessor-based
digital control, a solid-state power module, on/off circuit breaker
and thermocouple input jack. Includes microprocessor-based PID
control (proportional, integral, derivative), single segment,
single setpoint, 1 ramp to setpoint. Built-in adjustable high
limit overtemperature protection. Simultaneous LED display of
actual temperature vs. setpoint. May be configured to display
temperature in either °C or °F.
Option P 1200°C Digital 16 Segment Programmable
Controller
Control console is fully wired and includes advanced microprocessor-based
digital control, a solid-state power module, on/off circuit breaker
and thermocouple input jack. Includes microprocessor-based PID
control (proportional, integral, derivative), 1 program with
16 segments for 8 ramps (up and down) and 8 dwells (timed holds).
Built-in adjustable high limit overtemperature protection. Simultaneous
LED display of actual temperature vs. setpoint. May be configured
to display temperature in either °C or °F.
Option B Overtemperature Control (OTC)
Adjustable digital overtemperature control, factory installed on
selected control consoles with "B" designation; see chart. Protects
furnace and load in the event of primary control circuit failure.
Overrides main controller, assumes temperature control and shuts
off power to furnace if high limit is reached. Manual re-set
required for safety. Operates via magnetic contacts through signal
from independent thermocouple.
| |
Digital |
With Programmer |
With Overtemp
Control |
With Overtemp
Control |
| Model |
CC58114C |
CC58114PC |
CC58114BC |
CC58114PBC |
| Digital |
|
|
|
|
| With
Programmer |
|
|
|
|
| With
Overtemp Control |
|
|
|
|
| Electrical
Volts, Hz |
208/240V,
50/60Hz |
208/240V,
50/60Hz |
208/240V,
50/60Hz |
208/240V,
50/60Hz |
| Maximum
Amps |
30 |
30 |
30 |
30 |
Exterior
Dimensions
WxDxH in" (mm) |
14"(355)x19"(483)
x10"(254) |
14"(355)x19"(483)
x10"(254) |
14"(355)x19"(483)
x10"(254) |
14"(355)x19"(483)
x10"(254) |
| Ship
Weight lbs (kg) |
40
(18) |
40
(18) |
40
(18) |
40
(18) |
Notes:
- Maximum weight capacity is 0.5 pounds per square inch of interior
floor surface
- Actual performance may vary depending on load, chamber
size, sample placement, ambient temperature and environmental
conditions.
Heat-up/Cool-down Rates
|
)
