New Tenney Junior Temperature Benchtop Test Chambers

New! Tenney Junior Temperature Benchtop
and Floor Model Test Chambers

New! Product Demo

View the
Tenney Junior
Interactive
Product Demo

Tenney Jr. Temperature Chambers
Tenney’s compact junior line of temperature chambers in both benchtop test chamber and floor models are capable of simulating a wide range of temperature conditions.
Larger image

T-U Jr. temperature chamber
T-U Jr. temperature
chamber provides maximum performance with a minimum footprint.
Larger image

Tenney Compact Junior
Line of Temperature Benchtop and Floor Model Test Chambers

These temperature benchtop and floor model test chambers are well-suited for use in electronic, military, and pharmaceutical quality assurance and reliability testing, as well as research testing and production processes. In keeping with the needs of today's lab, we specifically designed these benchtop and floor chambers to have a compact exterior, yet an ample interior workspace to maximize valuable floor space.

Features of Tenney Junior
Temperature Benchtop and Floor Model Test Chambers

Construction

All models feature vapor-tight, continuously welded stainless steel interiors.
Structural reinforcement is used at all critical points.
A combination of fiberglass and polyurethane insulation surrounds the temperature chamber to maximize insulating characteristics, thus ensuring minimal thermal transfer.

Control Tolerance

±0.3°C after stabilization

Control System for Tenney Jr. and TU Jr. Temperature Benchtop and Floor Model Test Chambers

The proprietary controller can be used to manually set the chamber at a given temperature, or it may be used to enter, store, and execute a temperature profile.

Resolution

Setpoint and chamber temperature are displayed with 0.1°C or 0.1°F resolution.

Sensors

A platinum RTD sensor measures
temperature in the chamber.
The sensors provide excellent control and display accuracy with minimum maintenance.

Refrigeration System

Tenney Hermeticool®: air-cooled, readily accessible hermetic system uses accurately calibrated capillary tubes rather than mechanical expansion valves.
This simplifies the system and reduces the likelihood of leaks.

Heating System

Low-mass nichrome, open wire heating elements are used to reduce thermal lag and provide rapid response to instrument demand.
The heating elements are isolated from the workspace to reduce radiant influence on the test item.

Electrical

All wiring in Tenney temperature chambers complies with NEC. Electrical components are located in a readily accessible, integral control panel.

Conditioning System

Uniform conditions are assured through the use of a vertical-down recirculating conditioning stream.
The system draws air from the bottom of the workspace, conditions as required, then discharges the air through a grille at the ceiling level.
The compact design of the conditioning plenum allows the test chambers to offer a larger proportional area of interior volume to exterior volume than afforded by conventional chambers.

Door

Since the temperature chamber is continuously welded, the door remains as the final sealing surface to maintain atmosphere integrity.
All doors are equipped with double gaskets that trap air for the purpose of insulation.

Watlow F4 Controller